Emulators, Trace Probes, and Flash Programmers

JTAG/SWD Emulator (J-Link™ ARM)

J-Link™ is a USB powered JTAG emulator for ARM cores. It connects via USB to the Windows (2000/XP/Vista) host development PC.

Main Features

• Any ARM7, ARM9, ARM11, Cortex M0, Cortex M1, Cortex M3 Core Support (Including Thumb Mode)
• Serial Wire Debug (SWD) and Serial Wire Viewer (SWV) Support
• All JTAG Signals can be Monitored and Target Voltage can be Measured
• Support for Multiple Devices
• Fully Plug and Play Compatible

JTAG/SWD Emulator (J-Link™ ARM PRO)

J-Link™ ARM PRO is an enhanced version of the standard J-Link. It has an Ethernet interface in addition to the USB interface. It offers two additional LEDs which are used as hardware status indicators. It comes complete with the following add-on modules: J-Flash, Flash Breakpoints, GDB Server, and RDI component. It connects via USB or Ethernet to the Windows (2000/XP/Vista) host development PC.

Main Features

• Fully Compatible to the J-Link ARM
• Ethernet Interface
• J-Flash Included For Production Flash Programming
• Flash Breakpoints Included to Permit an Unlimited Number of Breakpoints While Debugging in Flash; You Will No Longer Be Restricted to the Hardware Breakpoint of Your Device
• GDB Server and Remote Debug Interface (RDI) Included

Trace for ARM and Cortex M3 (J-Trace™)

J-Trace is a high speed hardware Trace Probe for ARM and Cortex M3. It connects via USB to the PC host running Windows. J-Trace integrates seamlessly into a wide range of IDEs.

Main Features

• Fully Compatible to the J-Link ARM
• Adds Trace Functionality

Flash Programmer (Flasher)

Flasher is a Flash Programming tool available for ARM, Cortex, Renesas, ST Microelectronics, and Toshiba devices. The Flasher family eases the implementation into a production site by allowing the flash programming to be triggered manually or remotely.

Main Features

• Once Set Up, Flasher can be Controlled Without the Use of PC Application

BDM Emulator (J-Link™ BDM26)

J-Link ColdFire™ BDM 26 is a USB powered BDM emulator for ColdFire™ cores. It connects via USB to the Windows (2000/XP/Vista) host development PC.

Main Features

• Any ColdFire™ V2/3/4 Supported
• No Power Supply Required; Powered Via USB

J-Link™ ARM & Flasher ARM Related Software

Software to be used with Segger's industry standard JTAG/SWD/SWV Emulator, Flash Programmer and Trace (ETM - Embedded Trace Macrocell) Probe. As the original manufacturer of the J-Link, J-Trace, and Flasher ARM we are happy to inform you that this software also supports the DIGI JTAG Link, Atmel SAM-ICE, IAR J-Link, and IAR J-Trace.